5-chain

How To Install UFO LED High Bay Light Within 5 Minutes

People often asked in the LED forum: Where should I install these high bay fixtures after I buy them? Then how to install led high bay lamp? They look big and heavy. After all, not everyone is an electrician. In fact, I think the UFO lamp is one of the best commercial industrial lightings. Durable quality, excellent luminous efficiency, plug, and play. To this end, I have compiled three installation methods for UFO lamps that are common on the market and can help you install them within 5 minutes.

high bay installation

 

Always be sure turn off the power before starting connection work.

Installation 1: The Suspension Loop

ufo high bay install-1

Step 1: Install the prepared hooks (not included) on the ceiling. Before installation, please ensure that the mounting hooks bear at least 3 times the weight of the bulb. Screw the circular ring tightly.

Step 2: Screw the included hanging ring clockwise into the hole on the top of lamp body, and then tighten the hanging ring bolt to ensure that the hanging ring won’t come off.

ufo high bay install-2

Step 3: Hang the lamp body on the hook, and connect the brown/black line of the AC input line separately with the live line and the Neutral line of the main supply. The yellow-green ground wire must be earthed.

Step 4: To make the lamp dimmable, please connect a 0-10 V dimmer (not included) with the dimming signal line of the lamp, connect the DC + port and DC – port with the corresponding line on the dimmer.

Step 5: After the installation, please confirm whether the wiring is correct. (Caution: Connecting the mains power supply with the dimming signal line will cause fetal damage to the lamp.)

Hang rope mounted expansion hook at the other end  and connect the AC wire to an outlet

Installation 2: U-Shape Rotating Bracket

If you want to adjust the angle of the luminaire to achieve a specific lighting effect, then bracket mounting will be a good choice.

high bay installation-1

STEP 1. Use chalk or sharp tool to mark signs on the top of the ceiling or wall, then drill holes on the signs by an electric drill.

STEP 2. Use a hammer to put the expansion screws into the holes.

STEP 3. The holes on the bracket align with the expansion screws.

STEP 4. Push the light to one side, and finally tighten the nut of the screws.

After installation, please wire in accordance with the local connection standard, and make sure there is a good joint protective measure. Users can adjust the degree to left or right in a vertical direction by adjusting the screw on the bracket.

Please note that not every UFO lamp will be equipped with a mounting bracket. So when you buy high bay UFO on the shopping site, such as Amazon, Walmart, and eBay, please be sure to look at the package content carefully.

Installation 3: The Suspension Chain

UFO high bay install-2

Turn of the breaker

STEP 1: Install the prepared hooks (not included) on the ceiling. Before installation, please ensure that the mounting hooks bear at least 3 times the weight of the bulb. Screw the circular ring tightly.

STEP 2: Wire hook and fasten ring.

STEP 3: Hanging chain. Tighten the hook with the chain ad in the picture. Put the chain and security hook on the hanging hook.

STEP 4: Wiring as shown and then light up the lamp.

Conclusion

For all of the above installation, it is recommended that all models with a safety rope.

lamp safety rope

Compared to the above installation methods, the suspension loop and the suspension chain is a simpler installation method. In contrast, the Bracket type installation is slightly more complicated, but with greater flexibility and stability. The exact installation method depends on the type of work in your workplace and the fixture.

Do you have any other questions about the installation of led UFO high bay? Or you are not sure how many ufo lights you need. You can leave a comment below, maybe I can help you.

 

 

0 0 votes
Article Rating

Related Posts

Subscribe
Notify of
guest
4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jackson Bush
2 years ago

Its good to know that the mounting hooks should be at least 3 times the weight of the bay light bulb. I bought some hooks from a department store thinking it could hold up my new bay light, but knowing I need hooks that should hold 3 times the lights weight, I need to get stronger holding hooks. Thank you for the information on hanging up bay lights properly.

trackback

[…] This post will help you: How To Install UFO LED High Bay Light Within 5 Minutes […]

UFO Led High Bay Light
9 months ago

Thank you for the reminders and advice. I truly appreciate this blog, it is indeed advantageous to all the readers.

4
0
Would love your thoughts, please comment.x
()
x